A Manitou apresentou o MRT 4070 na CONEXPO-CON/AGG 2026 como o novo modelo de grande alcance de sua linha de manipuladores telescópicos rotativos. A cobertura publicada do lançamento informa como especificações principais aproximadamente 39.9 m de altura máxima de elevação, 7 t de capacidade máxima e 26.8 m de alcance horizontal.
Esses números colocam o MRT 4070 em uma classe especializada. Por si sós, eles não informam ao comprador o que a máquina pode elevar a 40 m, no alcance máximo ou com um implemento específico.
## Especificações principais publicadas
Launch coverage reports a 211 hp engine with a continuously variable transmission, Easy Step cab access and remote-control functions. The model’s 131 ft marketing shorthand corresponds to approximately 40 m of maximum lift height.
For comparison, JLG’s official R13100 page lists a 97 ft maximum lift height, 86 ft maximum forward reach and 13,200 lb rated capacity. JLG separately publishes 5,500 lb capacity at maximum height and 440 lb at maximum reach. That difference between rated capacity and capacity at the edge of the load chart is exactly why buyers should not compare rotating telehandlers on model names or headline tonnage alone.
| Item publicado | Manitou MRT 4070 | JLG R13100 |
|—|—:|—:|
| Altura máxima de elevação | cerca de 39.9 m / 131 ft | 29.6 m / 97 ft |
| Capacidade máxima | cerca de 7,000 kg / 15,400 lb | 6,000 kg / 13,200 lb |
| Alcance máximo | cerca de 26.8 m / 88 ft | 26 m / 86 ft |
A tabela compara apenas as especificações principais publicadas. Ela não representa equivalência de preço, produtividade ou aplicação.
## O que não foi estabelecido pelo material de lançamento
Manitou’s launch coverage does not provide a public list price that supports a universal USD 380,000 to 480,000 transaction range. It also does not establish a fixed USD 120,000 to 200,000 saving against a factory-direct alternative, a standard utilization rate, or a single delivery lead time for every market.
Esses números dependem da configuração para o país, do pacote de emissões, dos implementos, da garantia, do escopo do distribuidor, do frete, dos impostos de importação, do comissionamento e da data da cotação. Eles devem vir de ofertas escritas e comparáveis de fornecedores — não de uma faixa de mercado sem fonte.
## O checklist do comprador
Peça a cada fornecedor pré-selecionado a tabela de carga e a configuração exatas por trás de sua oferta. No mínimo, compare:
– capacity at the required lift height and forward reach;
– outrigger footprint, setup limits and ground-bearing requirements;
– attachment recognition and the approved attachment list;
– engine emissions configuration for the destination market;
– remote-control functions and local operator requirements;
– transport dimensions and dismantling needs;
– parts availability, diagnostic access and response-time commitments;
– warranty coverage, commissioning and operator training;
– a delivered price with freight, duty and local charges separated.
For a China-direct proposal, identify the manufacturer and exact model. Require a serialised load chart, applicable conformity documents and a parts list tied to that configuration. A generic “30 to 40 m” specification is not comparable to a named production model.
For a rental fleet, residual value and service coverage belong in the model, but utilization must come from the fleet’s own records. For a contractor or tender buyer, check whether an approved-brand list, dealer response time or third-party certification is a scored requirement before treating a lower equipment price as an equivalent bid.
The MRT 4070’s 40 m reach is a meaningful product development. The procurement decision starts after that headline: at the exact load point, support contract, compliance package and delivered quotation.
## Sources
– [Construction Mirror, Manitou MRT 4070 launch at CONEXPO 2026](https://constructionmirror.com/manitou-group-unveils-new-compact-loaders-and-mrt-4070-rotating-telehandler-at-conexpo-2026/)
– [HeavyQuip Magazine, Manitou at CONEXPO 2026](https://www.heavyquipmag.com/2026/04/02/298622/)
– [Industrial Vehicle Technology International, Manitou CONEXPO range](https://www.ivtinternational.com/news/construction/conexpo-manitou-group-expands-compact-loader-and-electric-ranges.html)
– [JLG R13100 official specifications](https://www.jlg.com/en/equipment/telehandlers/rotating/r13100)
– [Manitou MRT Vision+ range](https://www.manitou.com/en-US/our-range-of-mrt-privilege-plus-rotary-telescopic-handlers)