Manitou는 CONEXPO-CON/AGG 2026에서 MRT 4070을 회전식 텔레핸들러 제품군의 새로운 고도 작업 모델로 공개했습니다. 공개된 출시 보도는 주요 사양으로 약 39.9 m의 최대 인양 높이, 7 t의 최대 용량, 26.8 m의 수평 작업 반경을 제시합니다.
이 수치는 MRT 4070을 특수 장비 등급에 포함시킵니다. 하지만 이 수치만으로는 장비가 40 m에서, 최대 작업 반경에서 또는 특정 어태치먼트를 장착했을 때 무엇을 들어 올릴 수 있는지 구매자가 알 수 없습니다.
## 공개된 주요 사양
Launch coverage reports a 211 hp engine with a continuously variable transmission, Easy Step cab access and remote-control functions. The model’s 131 ft marketing shorthand corresponds to approximately 40 m of maximum lift height.
For comparison, JLG’s official R13100 page lists a 97 ft maximum lift height, 86 ft maximum forward reach and 13,200 lb rated capacity. JLG separately publishes 5,500 lb capacity at maximum height and 440 lb at maximum reach. That difference between rated capacity and capacity at the edge of the load chart is exactly why buyers should not compare rotating telehandlers on model names or headline tonnage alone.
| 공개 항목 | Manitou MRT 4070 | JLG R13100 |
|—|—:|—:|
| 최대 인양 높이 | 약 39.9 m / 131 ft | 29.6 m / 97 ft |
| 최대 용량 | 약 7,000 kg / 15,400 lb | 6,000 kg / 13,200 lb |
| 최대 작업 반경 | 약 26.8 m / 88 ft | 26 m / 86 ft |
이 표는 공개된 주요 사양만 비교합니다. 가격, 생산성 또는 용도의 동등성을 의미하지 않습니다.
## 출시 자료로 확인되지 않은 사항
Manitou’s launch coverage does not provide a public list price that supports a universal USD 380,000 to 480,000 transaction range. It also does not establish a fixed USD 120,000 to 200,000 saving against a factory-direct alternative, a standard utilization rate, or a single delivery lead time for every market.
이러한 수치는 국가별 구성, 배출가스 패키지, 어태치먼트, 보증, 딜러의 업무 범위, 운송비, 관세, 시운전 및 견적일에 따라 달라집니다. 출처 없는 시장 가격 범위가 아니라 서면으로 작성된 비교 가능한 공급업체 제안서에서 확인해야 합니다.
## 구매자 체크리스트
최종 후보에 오른 모든 공급업체에 제안의 근거가 된 정확한 하중 차트와 구성을 요청하십시오. 최소한 다음 사항을 비교해야 합니다:
– capacity at the required lift height and forward reach;
– outrigger footprint, setup limits and ground-bearing requirements;
– attachment recognition and the approved attachment list;
– engine emissions configuration for the destination market;
– remote-control functions and local operator requirements;
– transport dimensions and dismantling needs;
– parts availability, diagnostic access and response-time commitments;
– warranty coverage, commissioning and operator training;
– a delivered price with freight, duty and local charges separated.
For a China-direct proposal, identify the manufacturer and exact model. Require a serialised load chart, applicable conformity documents and a parts list tied to that configuration. A generic “30 to 40 m” specification is not comparable to a named production model.
For a rental fleet, residual value and service coverage belong in the model, but utilization must come from the fleet’s own records. For a contractor or tender buyer, check whether an approved-brand list, dealer response time or third-party certification is a scored requirement before treating a lower equipment price as an equivalent bid.
The MRT 4070’s 40 m reach is a meaningful product development. The procurement decision starts after that headline: at the exact load point, support contract, compliance package and delivered quotation.
## Sources
– [Construction Mirror, Manitou MRT 4070 launch at CONEXPO 2026](https://constructionmirror.com/manitou-group-unveils-new-compact-loaders-and-mrt-4070-rotating-telehandler-at-conexpo-2026/)
– [HeavyQuip Magazine, Manitou at CONEXPO 2026](https://www.heavyquipmag.com/2026/04/02/298622/)
– [Industrial Vehicle Technology International, Manitou CONEXPO range](https://www.ivtinternational.com/news/construction/conexpo-manitou-group-expands-compact-loader-and-electric-ranges.html)
– [JLG R13100 official specifications](https://www.jlg.com/en/equipment/telehandlers/rotating/r13100)
– [Manitou MRT Vision+ range](https://www.manitou.com/en-US/our-range-of-mrt-privilege-plus-rotary-telescopic-handlers)