Telehandler Sweeper with Side Brush
Key Specifications
DatasheetTS-SW22
Pick-up Sweeper with Side Brush
- Sweeping Width
- 2,200 mm87 in
- Hopper CapacityHydraulic dump
- 800 L210 US gal
- Working Pressure
- 16–18 MPa2,320–2,610 psi
- Sweeper Weight
- 850 kg1,875 lb
- Dimensions
- 2,543 × 1,810 × 1,100 mm100 × 71 × 43 in
Values as listed by the factory.
Mounting Type
Quick Coupler
Product Description
Sweep and collect in one pass
The TS-SW22 is a pick-up sweeper: the main brush sweeps a 2,200 mm (87 in) path and lifts the debris into an 800 L (210 US gal) hopper, while the side brush cleans along curbs, walls and edges. The hopper dumps hydraulically, so you can empty it into a container or truck without leaving the cab.
The brushes use mixed steel-wire and nylon bristles; the factory lists the brush diameter as 660 / 205 mm (26 / 8.1 in).
Hydraulic needs
The brush drive works at 16–18 MPa (2,320–2,610 psi). The Telescro telehandlers that take this sweeper run a higher auxiliary pressure, so it is supplied with a pressure relief valve. Our explainer on auxiliary hydraulic flow shows what else to check; we confirm the flow for your machine with the quote.
Machines and rental use
The sweeper fits Telescro telehandlers from the T625-A up to the T1850, such as the T1035 telehandler and the T3507 telehandler. It suits the yards and smaller sites where compact telehandlers work, and our article on attachments for rental fleets shows how tools like this add use to a fleet.
Tell us the surfaces you sweep, such as asphalt, concrete or compacted gravel, and the usual debris, so we can confirm the brush suits them. Send your machine’s auxiliary pressure and flow too: we confirm the hydraulic setup with the quote.
Other attachments are in the telehandler attachments catalog.
Variants
Capacity is the hopper volume. Overall dimensions as listed by the factory.
| Part code | Capacity | Dimensions | Weight | Notes |
|---|---|---|---|---|
| TS-SW22Pick-up sweeper with side brush | 800 L210 US gal | 2,543 × 1,810 × 1,100 mm100 × 71 × 43 in | 850 kg | Sweeping width 2,200 mm87 in |
Specifications
| Specification | Value | Notes |
|---|---|---|
| Brush diameter | 660 / 205 mm26 / 8.1 in | As listed by the factory |
| Bristles | Mixed steel-wire and nylon bristles | |
| Hydraulic motor displacement | 245 mL/rev | |
| Working pressure | 16–18 MPa2,320–2,610 psi | |
| Hydraulic dump | Yes | |
| Material | Q355 steel | |
| Standard color | Black |
Fits These Telescro Telehandlers
Find your Telescro telehandler in the table below.
1.2–2.5 t rated load
| Telescro model | Pick-up sweeper with side brushTS-SW22 | Notes |
|---|---|---|
| T625-A Compact Telehandler2.5t / 5.8m | Fits | Confirm hydraulic flow; check the load chart |
3.5 t rated load
| Telescro model | Pick-up sweeper with side brushTS-SW22 | Notes |
|---|---|---|
| T4504 Telehandler3.5t / 4.5m | Fits | Confirm hydraulic flow at order |
| T3507 Telehandler3.5t / 7m | Fits | |
| T735-A Agricultural Telehandler3.5t / 7m | Fits | |
| T1035 Telehandler3.5t / 10m | Fits |
4–5 t rated load
| Telescro model | Pick-up sweeper with side brushTS-SW22 | Notes |
|---|---|---|
| T1440 Telehandler4t / 14m | Fits | |
| TH1840 Telehandler4t / 17.5m | Fits | |
| T1850 Telehandler5t / 18m | Fits |
Fits means it mounts on that model. Ask us means we check your machine and job before you order. The safe working load always depends on the machine's load chart.
Not sure it fits your machine?
Configuration Options
Standard Configuration
- Pick-up sweeper with main brush and hopper800 L (210 US gal) hopper
- Side brushFor curbs and edges
- Hydraulic hopper dump
- Black paint finishStandard color
Requirements, Options and Limits
What your telehandler needs, what you can add, and where this attachment should not be used.
Machine requirements
- Auxiliary hydraulic circuit for the brush motorsFlow is confirmed with your quote
- Pressure relief valve set for 16–18 MPa (2,320–2,610 psi)Fitted at order
- Sweeper weight of 850 kg (1,875 lb) plus a full hopper within your load chartCheck at your working reach
Available options
- Coupler bracket to suit your telehandlerSend your machine model and coupler type
Limits of use
- Machines below 16 MPa (2,320 psi) auxiliary pressureAsk us to check your hydraulics
- Full hopper over the rated load at your reachEmpty the hopper more often
Important Safety Information
Verify the allowable load on the host telehandler load chart. Make sure the attachment is locked to the quick coupler before operation. Keep people clear of the brushes while they turn, and stop the brushes and lower the attachment before leaving the cab. Depressurize the auxiliary circuit before connecting or disconnecting hoses.
Actual allowable load depends on the host telehandler and its load chart. Always operate within the host machine’s limits.
Interested in this attachment?
Our engineers can help you verify compatibility with your machine and provide customized solutions.
Response Time
Within 2 hours
on business days