Model: Snow Blower Part code: TS-SB25

Telehandler Snow Blower

This telehandler snow blower throws snow at least 6 m (19 ft 8 in) away and more than 2.5 m (8 ft 2 in) high. It needs 120 L/min (32 US gpm) or more of auxiliary flow at 16–21 MPa (2,320–3,050 psi), so among Telescro models it fits the TH1840. For a quote, send your model and auxiliary flow.
View Specs
Technical overview

Key Specifications

DatasheetTS-SB25

Snow Blower

Throw Distance
At least 6 m19 ft 8 in
Throw Height
More than 2.5 m8 ft 2 in
Required FlowAt 16–21 MPa (2,320–3,050 psi)
120 L/min (32 US gpm) or more
Blower Weight
780 kg1,720 lb
Dimensions
2,560 × 1,130 × 1,800 mm101 × 44 × 71 in

Values as listed by the factory.

Mounting Type

Quick Coupler

Product Overview

Product Description

Throwing snow clear of the road

The TS-SB25 snow blower picks up snow and throws it at least 6 m (19 ft 8 in) away and more than 2.5 m (8 ft 2 in) high, so it clears over banks instead of building them. It suits depots, factory yards, access roads and car parks where the snow has to go somewhere, not just be pushed aside.

Flow decides which machine can run it

A blower needs a lot of oil: this one asks for 120 L/min (32 US gpm) or more at 16–21 MPa (2,320–3,050 psi). Among Telescro models, the TH1840 telehandler supplies that flow, and the blower is fitted with a pressure relief valve for it. The T1035 telehandler‘s 110 L/min pump flow is not enough for this blower; choose the snow plow instead. Our hydraulic flow guide and the explainer on auxiliary hydraulic flow show how to check other machines.

Weight and mounting

The blower weighs 780 kg (1,720 lb) and mounts on the quick coupler. It is built in Q355 steel and painted yellow and black.

Before you order

Send the auxiliary flow and pressure from your machine’s spec sheet. If your machine cannot reach the required flow, the snow plow, which runs on its own hydraulic power unit, is the usual alternative.

Compare other telehandler attachment types, or browse the telehandler attachments catalog.

Options

Variants

Dimensions are length × width × height.

Part codeDimensionsWeightNotes
TS-SB25Snow blower2,560 × 1,130 × 1,800 mm101 × 44 × 71 in780 kgThrows snow at least 6 m19 ft 8 in

Specifications

SpecificationValue
Working pressure16–21 MPa2,320–3,050 psi
Minimum auxiliary flow120 L/min32 US gpm
Throw distanceAt least 6 m19 ft 8 in
Throw heightMore than 2.5 m8 ft 2 in
MaterialQ355 steel
Standard colorYellow / black
Fitment

Fits These Telescro Telehandlers

Find your Telescro telehandler in the table below.

4–5 t rated load

Telescro modelSnow blowerTS-SB25Notes
TH1840 Telehandler4t / 17.5mFitsPressure relief valve

Fits means it mounts on that model. Ask us means we check your machine and job before you order. The safe working load always depends on the machine's load chart.

Not sure it fits your machine?

Features

Configuration Options

Standard Configuration

  • Snow blower with hydraulic driveQ355 steel
  • Yellow / black paint finishStandard color
Before You Order

Requirements, Options and Limits

What your telehandler needs, what you can add, and where this attachment should not be used.

Machine requirements

  • Auxiliary hydraulic flow of 120 L/min (32 US gpm) or moreAmong Telescro models, the TH1840 supplies it
  • Pressure relief valve when your machine's auxiliary pressure is above 21 MPa (3,050 psi)Fitted at order
  • Blower weight of 780 kg (1,720 lb) within your load chartCheck at your working reach

Available options

  • Coupler bracket to suit your telehandlerSend your machine model and coupler type

Limits of use

  • Machines with less than 120 L/min (32 US gpm) of auxiliary flowChoose a snow plow instead
Technical Data

Hydraulic Requirements

Pressure

16–21 MPa

2,320–3,050 psi

Flow Rate

120 L/min (32 US gpm) or more

Important Safety Information

Verify the allowable load on the host telehandler load chart. Keep people well clear of the discharge, which throws snow and anything hidden in it. Stop the blower and lower it to the ground before clearing a blockage or leaving the cab. Depressurize the auxiliary circuit before connecting or disconnecting hoses.

Actual allowable load depends on the host telehandler and its load chart. Always operate within the host machine’s limits.

Get in Touch

Interested in this attachment?

Our engineers can help you verify compatibility with your machine and provide customized solutions.

Response Time

Within 2 hours

on business days