Model: Log Grab Part code: TS-LG10

Telehandler Log Grab

This telehandler log grab clamps logs, poles and timber of 340–1,000 mm (13–39 in) in diameter and opens to 1,244 mm (49 in). It runs on 50–70 L/min (13–18 US gpm) of auxiliary flow and fits Telescro telehandlers from the T625-A up to the T1850. For a quote, send your model, coupler type and log sizes.
View Specs
Technical overview

Key Specifications

DatasheetTS-LG10

Log Grab

Clamping Diameter
340–1,000 mm13–39 in
Maximum Opening
1,244 mm49 in
Hydraulic FlowUp to 25 MPa (3,630 psi)
50–70 L/min13–18 US gpm
Grab WeightIncluding mounting bracket
645 kg1,420 lb
Dimensions
1,250 × 1,500 × 1,130 mm49 × 59 × 44 in

Values as listed by the factory.

Mounting Type

Quick Coupler

Product Overview

Product Description

Loading logs and timber with a telehandler

The TS-LG10 log grab picks up logs, poles and sawn timber and holds them in a hydraulic clamp while you load trucks, sort a yard or stack firewood lengths. It clamps diameters of 340–1,000 mm (13–39 in) and opens to 1,244 mm (49 in); the main structure is Q355 steel.

Hydraulics and mounting

The clamp runs on 50–70 L/min (13–18 US gpm) at up to 25 MPa (3,630 psi). Our explainer on auxiliary hydraulic flow covers what your machine needs to supply. The grab mounts on your telehandler quick coupler, and its weight of 645 kg (1,420 lb) includes the bracket.

Which machines it fits

It fits Telescro telehandlers from the T625-A up to the T1850, such as the T1035 telehandler and the T3507 telehandler. Our page on attachment compatibility explains what to check on any machine before you order.

Choosing the clamp range

Measure the smallest and largest logs you handle. Logs thinner than the 340–1,000 mm (13–39 in) clamping range are not held firmly, and logs above it do not fit between the arms. If most of your logs sit near one end of the range, tell us, so we can confirm the grab suits the job. Send your heaviest log weight as well: we confirm the load per lift with the quote.

Other grabs and clamps are in the telehandler attachments catalog.

Options

Variants

Dimensions are length × width × height. Weight includes the mounting bracket.

Part codeDimensionsWeightNotes
TS-LG10Log grab1,250 × 1,500 × 1,130 mm49 × 59 × 44 in645 kgClamps 340–1,000 mm (13–39 in) logs

Specifications

SpecificationValue
Maximum hydraulic pressure25 MPa3,630 psi
Hydraulic flow50–70 L/min13–18 US gpm
MaterialQ355 steel (main structure)
Standard colorBlack
Fitment

Fits These Telescro Telehandlers

Find your Telescro telehandler in the table below.

1.2–2.5 t rated load

Telescro modelLog grabTS-LG10Notes
T625-A Compact Telehandler2.5t / 5.8mFits

3.5 t rated load

Telescro modelLog grabTS-LG10Notes
T4504 Telehandler3.5t / 4.5mFitsConfirm hydraulic flow at order
T3507 Telehandler3.5t / 7mFits
T735-A Agricultural Telehandler3.5t / 7mFits
T1035 Telehandler3.5t / 10mFits

4–5 t rated load

Telescro modelLog grabTS-LG10Notes
T1440 Telehandler4t / 14mFits
TH1840 Telehandler4t / 17.5mFitsPressure relief valve
T1850 Telehandler5t / 18mFits

Fits means it mounts on that model. Ask us means we check your machine and job before you order. The safe working load always depends on the machine's load chart.

Not sure it fits your machine?

Features

Configuration Options

Standard Configuration

  • Log grab with hydraulic clampQ355 steel (main structure)
  • Mounting bracketIncluded in the weight
  • Black paint finishStandard color
Before You Order

Requirements, Options and Limits

What your telehandler needs, what you can add, and where this attachment should not be used.

Machine requirements

  • Auxiliary hydraulic circuit with 50–70 L/min (13–18 US gpm)Less flow makes the clamp move more slowly
  • Pressure relief valve when your machine's auxiliary pressure is above 25 MPa (3,630 psi)Fitted at order
  • Grab weight of 645 kg (1,420 lb) plus the logs within your load chartCheck at your working reach

Available options

  • Coupler bracket to suit your telehandlerSend your machine model and coupler type

Limits of use

  • Logs outside the 340–1,000 mm (13–39 in) clamping rangeChoose a different grab
  • Machines without an auxiliary hydraulic circuitThe grab cannot open or close
  • Heavy single logsSend your heaviest log weight: we confirm the grab's rated load
Technical Data

Hydraulic Requirements

Pressure

Up to 25 MPa

3,630 psi

Flow Rate

50–70 L/min

13–18 US gpm

Important Safety Information

Verify the allowable load on the host telehandler load chart before lifting logs. Make sure the grab is fully locked to the quick coupler and the load is gripped securely before lifting. Keep people clear of the clamp and never let anyone stand under a raised load. Travel with the load low and avoid sudden movements.

Actual allowable load depends on the host telehandler and its load chart. Always operate within the host machine’s limits.

Get in Touch

Interested in this attachment?

Our engineers can help you verify compatibility with your machine and provide customized solutions.

Response Time

Within 2 hours

on business days