Model: Multi-purpose Grab Bucket Part code: TS-GB14

Telehandler Grab Bucket, Multi-Purpose 1,400 L

This telehandler grab bucket is a multi-purpose 1,400 L (370 US gal) bucket with a hydraulic top grab that holds silage, manure and loose loads in place. It fits Telescro telehandlers from the T625-A up to the T1850 that have an auxiliary hydraulic circuit. For a quote, send your model, coupler type and main material.
View Specs
Technical overview

Key Specifications

DatasheetTS-GB14

Multi-purpose Grab Bucket

Heaped CapacityLoading capacity 1,150 L (305 US gal)
1,400 L370 US gal
Bucket WeightWith the top grab
890 kg1,960 lb
Grab Open HeightGrab closed: 1,033 mm (41 in)
1,776 mm70 in
Grab HydraulicsNeeds an auxiliary circuit
Lines included
Dimensions
1,280 × 2,450 × 1,033 mm50 × 96 × 41 in

Values as listed by the factory.

Mounting Type

Quick Coupler

Product Overview

Product Description

A bucket and a grab in one attachment

The TS-GB14 grab bucket combines a 1,400 L (370 US gal) heaped bucket with a hydraulic top grab. The bucket scoops the load; the grab closes over it, so silage, manure, straw and loose feed stay in the bucket while you lift, travel and tip. That saves changing between a bucket and a fork during feeding and clean-out.

The bucket weighs 890 kg (1,960 lb) with the grab, so check the load chart at your working reach before lifting a full load.

Where it fits in farm work

On livestock farms it handles silage and muck in the same shift. For long, fibrous manure that needs tines rather than a bucket, compare it with our manure fork grab. The wider range of attachments for agriculture shows what else one machine can run through the season.

Hydraulics and machine choice

The grab runs on the telehandler’s auxiliary circuit, and hydraulic lines come with the bucket. If you are not sure what your machine supplies, our explainer on auxiliary hydraulic flow covers what to check. The bucket fits Telescro telehandlers from the T625-A up to the T1850; the T1035 telehandler and the T3507 telehandler are two examples, and our agricultural telehandlers page lists the farm models.

Not sure which coupler you have? Send a photo of the carriage with your inquiry and we match the bracket to it.

Browse the full telehandler attachments catalog for forks, clamps and lifting gear.

Options

Variants

Overall dimensions as listed by the factory.

Part codeCapacityDimensionsWeightNotes
TS-GB14Multi-purpose grab bucket1,400 L370 US gal1,280 × 2,450 × 1,033 mm50 × 96 × 41 in890 kg8 tines, 2 grab fingers

Specifications

SpecificationValue
Loading capacity1,150 L305 US gal
Bucket depth941 mm37 in
Height with grab open1,776 mm70 in
Height with grab closed1,033 mm41 in
Tines8
Grab fingers2
Hydraulic lines includedYes
MaterialQ355 steel (main structure)
Fitment

Fits These Telescro Telehandlers

Find your Telescro telehandler in the table below.

1.2–2.5 t rated load

Telescro modelMulti-purpose grab bucketTS-GB14Notes
T625-A Compact Telehandler2.5t / 5.8mFitsFull bucket is close to the rated load: check the load chart

3.5 t rated load

Telescro modelMulti-purpose grab bucketTS-GB14Notes
T4504 Telehandler3.5t / 4.5mFits
T3507 Telehandler3.5t / 7mFits
T735-A Agricultural Telehandler3.5t / 7mFits
T1035 Telehandler3.5t / 10mFits

4–5 t rated load

Telescro modelMulti-purpose grab bucketTS-GB14Notes
T1440 Telehandler4t / 14mFits
TH1840 Telehandler4t / 17.5mFits
T1850 Telehandler5t / 18mFits

Fits means it mounts on that model. Ask us means we check your machine and job before you order. The safe working load always depends on the machine's load chart.

Not sure it fits your machine?

Features

Configuration Options

Standard Configuration

  • Grab bucket bodyQ355 steel (main structure)
  • Hydraulic top grab8 tines, 2 grab fingers
  • Hydraulic linesFor the auxiliary circuit
  • Black paint finishStandard color
Before You Order

Requirements, Options and Limits

What your telehandler needs, what you can add, and where this attachment should not be used.

Machine requirements

  • Auxiliary hydraulic circuit for the top grabHydraulic lines are included
  • Bucket weight of 890 kg (1,960 lb) plus the load within your load chartCheck at your working reach
  • Quick coupler matched to your telehandlerConfirm the coupler type before ordering

Available options

  • Coupler bracket to suit your telehandlerSend your machine model and coupler type

Limits of use

  • Telehandlers without an auxiliary hydraulic circuitThe grab cannot open or close
  • Full bucket over the rated load at your reachCheck the load chart first

Important Safety Information

Always verify the allowable load on the host telehandler load chart before lifting a full bucket. Make sure the quick coupler is fully engaged and locked before operation. Keep people clear of the grab while it opens and closes, and never let anyone stand under a raised bucket. Depressurize the auxiliary circuit before connecting or disconnecting hoses.

Actual allowable load depends on the host telehandler and its load chart. Always operate within the host machine’s limits.

Get in Touch

Interested in this attachment?

Our engineers can help you verify compatibility with your machine and provide customized solutions.

Response Time

Within 2 hours

on business days