Model: Brick Clamp Part code: TS-BK20

Telehandler Brick Clamp

This telehandler brick clamp lifts and places packs of bricks and blocks up to 2,000 kg (4,410 lb) without pallets. Its hydraulic arms open 400–1,900 mm (16–75 in). It fits Telescro telehandlers from the T625-A up to the T1850 that have an auxiliary hydraulic circuit. For a quote, send your model and pack sizes.
View Specs
Technical overview

Key Specifications

DatasheetTS-BK20

Brick Clamp

Rated Load
2,000 kg4,410 lb
Opening Range
400–1,900 mm16–75 in
Arm Length
1,200 mm47 in
Clamp Weight
800 kg1,765 lb

Values as listed by the factory.

Mounting Type

Quick Coupler

Product Overview

Product Description

Placing brick and block packs without pallets

The TS-BK20 brick clamp grips a pack of bricks or concrete blocks from the sides with hydraulic arms, so packs can be lifted off the delivery truck and set down on a slab or at the work face without a pallet underneath. Packs stay banded as delivered, and there is no pallet to return or dispose of. It is rated for 2,000 kg (4,410 lb) and opens 400–1,900 mm (16–75 in).

Clamp weight counts

The clamp itself weighs 800 kg (1,765 lb). That weight comes off what the telehandler can lift at a given height and reach, which our guide on attachment weight and lifting capacity explains. Where packs arrive on pallets, standard pallet forks are lighter and simpler.

Machines and site use

It fits Telescro telehandlers from the T625-A up to the T1850 that have an auxiliary hydraulic circuit. For placing on upper floors, the T1440 telehandler and the T1850 telehandler give more lift height; compare all construction telehandlers for your site.

Before you order

Measure a typical pack: its width across the clamp arms and its weight. The pack has to sit inside the 400–1,900 mm (16–75 in) opening range and, together with the clamp, inside your machine’s load chart at the height where you place it. Pressure and flow for the clamp cylinders are confirmed with your quotation.

Forks, buckets and lifting gear are in the telehandler attachments catalog.

Options

Variants

Part codeCapacityWeightNotes
TS-BK20Brick clamp2,000 kg4,410 lb800 kgOpening 400–1,900 mm16–75 in

Specifications

SpecificationValue
Arm length1,200 mm47 in
Opening range400–1,900 mm16–75 in
MaterialQ355 steel
Standard colorWhite
Fitment

Fits These Telescro Telehandlers

Find your Telescro telehandler in the table below.

1.2–2.5 t rated load

Telescro modelBrick clampTS-BK20Notes
T625-A Compact Telehandler2.5t / 5.8mFitsCheck the load chart; derate at reach

3.5 t rated load

Telescro modelBrick clampTS-BK20Notes
T4504 Telehandler3.5t / 4.5mFits
T3507 Telehandler3.5t / 7mFits
T735-A Agricultural Telehandler3.5t / 7mFits
T1035 Telehandler3.5t / 10mFits

4–5 t rated load

Telescro modelBrick clampTS-BK20Notes
T1440 Telehandler4t / 14mFits
TH1840 Telehandler4t / 17.5mFits
T1850 Telehandler5t / 18mFits

Fits means it mounts on that model. Ask us means we check your machine and job before you order. The safe working load always depends on the machine's load chart.

Not sure it fits your machine?

Features

Configuration Options

Standard Configuration

  • Brick clamp frame with hydraulic armsQ355 steel
  • White paint finishStandard color
Before You Order

Requirements, Options and Limits

What your telehandler needs, what you can add, and where this attachment should not be used.

Machine requirements

  • Auxiliary hydraulic circuit for the clamp cylindersPressure and flow are confirmed with your quote
  • Clamp weight of 800 kg (1,765 lb) plus the pack within your load chartCheck at your placing height and reach
  • Quick coupler matched to your telehandlerConfirm the coupler type before ordering

Available options

  • Coupler bracket to suit your telehandlerSend your machine model and coupler type

Limits of use

  • Telehandlers without an auxiliary hydraulic circuitThe clamp cannot grip
  • Packs heavier than 2,000 kg (4,410 lb)Above the clamp's rated load
  • Packs outside the 400–1,900 mm (16–75 in) opening rangeAsk us about your pack size

Important Safety Information

Verify the allowable load on the host telehandler load chart at your placing height and reach. Make sure the clamp is locked to the quick coupler and the pack is fully gripped before lifting. Keep people clear of the clamp arms and never let anyone stand under a raised pack. Lift and lower smoothly.

Actual allowable load depends on the host telehandler and its load chart. Always operate within the host machine’s limits.

Get in Touch

Interested in this attachment?

Our engineers can help you verify compatibility with your machine and provide customized solutions.

Response Time

Within 2 hours

on business days