Model: Combination and Classic Bale Grab Part code: TS-BGM

Telehandler Bale Grab: Combination and Classic Models

This telehandler bale grab comes in two models: the TS-BGM combination grab, rated for 800 kg (1,765 lb), and the TS-BGC classic grab, which opens 190–1,960 mm (7.5–77 in). Both close with hydraulic cylinders and fit all nine Telescro telehandlers. For a quote, send your model, coupler type and bale sizes.
View Specs
Technical overview

Key Specifications

DatasheetTS-BGM

Combination and Classic Bale Grab

Rated LoadCombination grab TS-BGM
800 kg1,765 lb
Opening RangeClassic grab; combination grab 420–1,570 mm (17–62 in)
190–1,960 mm7.5–77 in
Grab WeightClassic / combination
325–390 kg715–860 lb
Tines and FingersBoth models
2 tines, 3 grab fingers
DimensionsTS-BGM
1,730 × 1,680 × 1,100 mm68 × 66 × 43 in

Values as listed by the factory.

Mounting Type

Quick Coupler

Product Overview

Product Description

Two bale grabs for telehandlers

Telescro builds two hydraulic bale grabs. Both have 2 tines and 3 grab fingers: the tines go under the bale and the fingers clamp it from above with hydraulic cylinders, so the bale stays put while you stack, load trailers or feed.

  • TS-BGM combination grab: rated for 800 kg (1,765 lb), opens 420–1,570 mm (17–62 in), weighs 390 kg (860 lb) and is made in Q355 steel.
  • TS-BGC classic grab: opens wider, 190–1,960 mm (7.5–77 in), and is lighter at 325 kg (715 lb).

Grab or clamp?

A bale grab carries the bale on its tines and holds it with the top fingers, which suits stacking and loading. For wrapped round bales, the round bale clamp holds the bale from the sides with curved arms and no tines. Our article on what a telehandler bale grab is used for covers the differences in more detail. Both grabs ship with hydraulic lines for the auxiliary circuit.

Machines and farm use

Both grabs fit all nine Telescro telehandlers, including the T735-A agricultural telehandler and the T1035 telehandler. See our agricultural telehandlers for the farm models and the wider list of attachments for agriculture.

Tell us whether you handle round bales, square bales or both, with the bale size and weight, and we recommend the grab that suits them.

More clamps and grabs are in the telehandler attachments catalog.

Options

Variants

Combination grab: overall dimensions as listed by the factory. Classic grab: length × width × height. Ask us for the classic grab's rated load.

Part codeCapacityDimensionsWeightNotes
TS-BGMCombination bale grab800 kg1,765 lb1,730 × 1,680 × 1,100 mm68 × 66 × 43 in390 kgOpening 420–1,570 mm17–62 in
TS-BGCClassic bale grab—1,240 × 1,150 × 1,220 mm49 × 45 × 48 in325 kgOpening 190–1,960 mm7.5–77 in

Specifications

SpecificationValue
Tine spacing, combination grab375 mm15 in
Tine spacing, classic grab335 mm13 in
Arm length, classic grab700 mm28 in
Hydraulic lines includedYes, both models
Material, combination grabQ355 steel
Color, combination grabRed
Color, classic grabTraffic red (RAL 3020) and jet black (RAL 9005)
Fitment

Fits These Telescro Telehandlers

Find your Telescro telehandler in the table below.

1.2–2.5 t rated load

Telescro modelCombination bale grabTS-BGMClassic bale grabTS-BGCNotes
T4512 Compact Telehandler1.2t / 4.5mFitsFitsCheck the load chart at full load
T625-A Compact Telehandler2.5t / 5.8mFitsFits

3.5 t rated load

Telescro modelCombination bale grabTS-BGMClassic bale grabTS-BGCNotes
T4504 Telehandler3.5t / 4.5mFitsFits
T3507 Telehandler3.5t / 7mFitsFits
T735-A Agricultural Telehandler3.5t / 7mFitsFits
T1035 Telehandler3.5t / 10mFitsFits

4–5 t rated load

Telescro modelCombination bale grabTS-BGMClassic bale grabTS-BGCNotes
T1440 Telehandler4t / 14mFitsFits
TH1840 Telehandler4t / 17.5mFitsFits
T1850 Telehandler5t / 18mFitsFits

Fits means it mounts on that model. Ask us means we check your machine and job before you order. The safe working load always depends on the machine's load chart.

Not sure it fits your machine?

Features

Configuration Options

Standard Configuration

  • Grab frame with tines and grab fingers2 tines, 3 grab fingers
  • Hydraulic clamp cylindersBoth models
  • Hydraulic linesFor the auxiliary circuit
Before You Order

Requirements, Options and Limits

What your telehandler needs, what you can add, and where this attachment should not be used.

Machine requirements

  • Auxiliary hydraulic circuit for the clamp cylindersHydraulic lines are included with both models
  • Bale weight plus grab weight within your load chartCombination grab rated for 800 kg (1,765 lb)
  • Quick coupler matched to your telehandlerConfirm the coupler type before ordering

Available options

  • Coupler bracket to suit your telehandlerSend your machine model and coupler type

Limits of use

  • Telehandlers without an auxiliary hydraulic circuitThe grab cannot close
  • Bales outside the opening rangeClassic 190–1,960 mm (7.5–77 in); combination 420–1,570 mm (17–62 in)
  • Heavy bales on the classic grabSend your bale weight: we confirm its rated load

Important Safety Information

Verify the allowable load on the host telehandler load chart before lifting bales. Make sure the grab is fully locked to the quick coupler before operation. Keep people clear of the tines and grab fingers, and never let anyone stand under a raised bale. Travel with the load low and avoid sudden movements.

Actual allowable load depends on the host telehandler and its load chart. Always operate within the host machine’s limits.

Get in Touch

Interested in this attachment?

Our engineers can help you verify compatibility with your machine and provide customized solutions.

Response Time

Within 2 hours

on business days