Telehandler Angle Broom for Snow and Sweeping
Key Specifications
DatasheetTS-RB26
Angle Rotary Broom
- Snow Depth
- Up to 200 mm7.9 in
- Brush Speed
- 200–400 rpm
- Working Pressure
- 16–18 MPa2,320–2,610 psi
- Broom Weight
- 860 kg1,895 lb
- Dimensions
- 2,823 × 1,880 × 878 mm111 × 74 × 35 in
Values as listed by the factory.
Mounting Type
Quick Coupler
Product Description
Snow and sweeping with one broom
The TS-RB26 angle rotary broom clears light snow up to 200 mm (7.9 in) deep in winter and sweeps dust, gravel and debris the rest of the year. The brush works at an angle, so material is pushed to one side in a windrow instead of being carried in front of the machine.
The brush turns at 200–400 rpm; the factory lists its diameter as 800 / 255 mm (31 / 10 in).
Hydraulic needs
The brush drive works at 16–18 MPa (2,320–2,610 psi), so the broom is supplied with a pressure relief valve for higher-pressure machines. Read our hydraulic flow guide and the explainer on auxiliary hydraulic flow to check what your machine delivers; we confirm the flow needed with your quote.
Machines and fleets
The broom fits all nine Telescro telehandlers; the T1440 telehandler and the TH1840 telehandler are two examples for yards and depots. For rental fleets, our article on attachments for rental fleets shows how winter tools add use to a machine.
When to choose a different tool
The broom is for light snow. Above 200 mm (7.9 in), a snow plow pushes snow faster, and a snow blower throws it clear where there is no room to pile it. Send your machine’s auxiliary pressure and flow, and we confirm the hydraulic setup with the quote.
Other attachments are in the telehandler attachments catalog.
Variants
Overall dimensions as listed by the factory.
| Part code | Dimensions | Weight | Notes |
|---|---|---|---|
| TS-RB26Angle rotary broom | 2,823 × 1,880 × 878 mm111 × 74 × 35 in | 860 kg | Brush 800 / 255 mm (31 / 10 in), as listed |
Specifications
| Specification | Value | Notes |
|---|---|---|
| Brush diameter | 800 / 255 mm31 / 10 in | As listed by the factory |
| Angle adjustment | ±7° | As listed by the factory |
| Brush speed | 200–400 rpm | |
| Maximum snow depth | 200 mm7.9 in | |
| Working pressure | 16–18 MPa2,320–2,610 psi | |
| Material | Q355 steel | |
| Standard color | Black |
Fits These Telescro Telehandlers
Find your Telescro telehandler in the table below.
1.2–2.5 t rated load
| Telescro model | Angle rotary broomTS-RB26 | Notes |
|---|---|---|
| T4512 Compact Telehandler1.2t / 4.5m | Fits | Confirm flow at order (high-flow option) |
| T625-A Compact Telehandler2.5t / 5.8m | Fits | Confirm hydraulic flow at order |
3.5 t rated load
| Telescro model | Angle rotary broomTS-RB26 | Notes |
|---|---|---|
| T4504 Telehandler3.5t / 4.5m | Fits | Confirm hydraulic flow at order |
| T3507 Telehandler3.5t / 7m | Fits | |
| T735-A Agricultural Telehandler3.5t / 7m | Fits | |
| T1035 Telehandler3.5t / 10m | Fits |
4–5 t rated load
| Telescro model | Angle rotary broomTS-RB26 | Notes |
|---|---|---|
| T1440 Telehandler4t / 14m | Fits | |
| TH1840 Telehandler4t / 17.5m | Fits | |
| T1850 Telehandler5t / 18m | Fits |
Fits means it mounts on that model. Ask us means we check your machine and job before you order. The safe working load always depends on the machine's load chart.
Not sure it fits your machine?
Configuration Options
Standard Configuration
- Angle rotary broom with hydraulic brush driveQ355 steel
- Black paint finishStandard color
Requirements, Options and Limits
What your telehandler needs, what you can add, and where this attachment should not be used.
Machine requirements
- Auxiliary hydraulic circuit for the brush motorFlow is confirmed with your quote
- Pressure relief valve set for 16–18 MPa (2,320–2,610 psi)Fitted at order
- Broom weight of 860 kg (1,895 lb) within your load chartCheck at your working reach
Available options
- Coupler bracket to suit your telehandlerSend your machine model and coupler type
Limits of use
- Snow deeper than 200 mm (7.9 in)Use a snow plow or a snow blower
- Machines below 16 MPa (2,320 psi) auxiliary pressureAsk us to check your hydraulics
Important Safety Information
Verify the allowable load on the host telehandler load chart. Make sure the attachment is locked to the quick coupler before operation. Keep people clear of the brushes while they turn, and stop the brushes and lower the attachment before leaving the cab. Depressurize the auxiliary circuit before connecting or disconnecting hoses.
Actual allowable load depends on the host telehandler and its load chart. Always operate within the host machine’s limits.
Interested in this attachment?
Our engineers can help you verify compatibility with your machine and provide customized solutions.
Response Time
Within 2 hours
on business days